FreeGuard Testing Methodology
最終確認: 2026-04-15
This page describes how FreeGuard tests VPN performance, security, and reliability across all server regions. Our testing methodology is transparent and reproducible.
Tools We Use
iperf3
Measures raw TCP/UDP throughput between the test client and a controlled iperf3 server placed at each target location.
ping / mtr
Measures round-trip latency and hop-by-hop packet loss using ICMP echo requests over a 60-second window.
DNSリークテスト
このチェックは freeguardvpn.com の A クエリを表示された各公開 DNS-over-HTTPS プロバイダーに送信し、応答メタデータだけを表示します。端末の再帰 DNS リゾルバーや、要求が VPN トンネルを使用するかどうかは特定できません。
WebRTC leak checker (headless Chromium)
Automates a headless Chromium session to capture local and public ICE candidates and compares them against the expected VPN IP.
IPv6リークテスト
この単一のデュアルスタックエンドポイントだけでは、IPv6 がトンネル化または遮断されているか証明できません。実際の確認には各ネットワークで管理下の IPv6 専用プローブが必要です。
Wireshark / tshark
Captures live traffic during each test run to confirm all packets flow through the encrypted tunnel and none bypass it.
Test Environment
Hardware
Dedicated bare-metal test machines with 8-core CPUs, 32 GB RAM, and 1 Gbps NIC — ensuring the client is never the bottleneck.
Network Conditions
Tests are run across multiple ISPs per source location, covering fiber, cable, and 4G/LTE connections to capture real-world variance.
Geographic Distribution
Tests are executed from 10+ source countries across Asia, Europe, and North America to reflect global user conditions.
Test Protocol
Each server location follows this standardized step-by-step procedure:
Connect to target VPN server
Establish the tunnel using the FreeGuard client. Wait 10 seconds for routing tables to stabilize.
Verify tunnel IP
Confirm the public IP matches the expected VPN server egress address before any measurements begin.
Run speed test (iperf3)
Execute a 30-second bidirectional iperf3 test. Record download, upload, and jitter.
Measure latency (ping/mtr)
Send 100 ICMP packets to the target. Record min, avg, max RTT and packet loss percentage.
DNSリークテスト
DNS リークを調べるには、実際のネットワークで OS、ブラウザー、VPN の DNS 設定をパケットキャプチャーまたはリゾルバーログと比較してください。
Run WebRTC leak test
Launch headless Chromium, collect ICE candidates, and assert no real IP is exposed.
IPv6リークテスト
この単一のデュアルスタックエンドポイントだけでは、IPv6 がトンネル化または遮断されているか証明できません。実際の確認には各ネットワークで管理下の IPv6 専用プローブが必要です。
Disconnect and reset
Tear down the tunnel, flush routing tables, and wait 30 seconds before the next run.
Repeat 3× and average
Perform the full sequence 3 times per session. Compute the mean for speed and latency; treat any single leak as a failure.
Test Schedule
Tests are conducted monthly across all server regions. Results are updated on corresponding tool, gaming, and streaming pages within 48 hours of completion.
Sample Size
Each server location is tested a minimum of 3 times from at least 2 different source locations. Final metrics are the arithmetic mean of all runs, with outliers (±2σ) discarded.
How to Reproduce Our Results
You can verify our results independently using the same open-source tools. Here is the minimal setup:
最終確認: 2026-04-15